Bike Preparation.
All Supermoto + Juniors bikes must be prepared to Motorcycling Australia (MA) Supermoto Guidelines
as a minimum.
You can open the MA Supermoto Guidelines here by -->
Clicking Here
All bikes (Including Juniors) entering the racetrack must be
"Race Prepped". As indicated in the list below
|
- One way valve on fuel cap breather hose |
|
- Catchment tank for radiator fluid |
|
- Catchment tank for fuel hoses & breather lines |
|
- Lockwire sump plug, and all fluid filler caps |
|
- Glycol based water mixes are not permitted. Only distilled water may be used in the radiators. |
|
- Oggy knobs / Skate board wheels must be fitted to the bike axles front and rear |
|
- Peg sliders need to be fitted to the underside of the foot pegs |
|
- Race numbers must be present on all 3 plates |
|
- Bikes are subject to scrutineering prior to entry on to the race track |
|
|
© - SupermotoWA |